Other Functions
You can connect an optional rotary commander
The rotary commander works by pressing buttons and/or rotating controls.
You can control an optional CD or MD unit with the rotary commander.
By pressing buttons (the SOURCE and MODE buttons)
EN
(SOURCE)
(MODE)
Each time you press (SOURCE), the source changes as follows:
TUNER nCD nMD nTV*
*When an optional TV tuner or Video is connected.
Pressing (MODE) changes the operation in the following ways;
•Tuner: FM1 nFM2 nAM
•CD unit: CD1 nCD2 n…
•MD unit: MD1 nMD2 n…
•TV/Video: TV nVideo1 nVideo2 n…
Tip
When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.
By rotating the control (the SEEK/ AMS control)
Rotate the control momentarily and release it to:
•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.
•Tune in stations automatically. Rotate and hold the control to tune in a specific station.
By pushing in and rotating the control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the number buttons.
•Change the disc.
Other operations
Rotate the VOL control to adjust the volume.
Press (ATT) to attenuate the sound.
OFF
Press (OFF) to turn off the unit.
16