Erasing an entire program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISCTRACK
PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P 1” above.
2 Press (2) (N) repeatedly until “DEL” appears.
PLAY MODEENTER
To erase Program 2, press (5) (n) repeatedly until “PGM 2” appears.
EN | 3 Press (6) (ENTER) for two seconds. | |
| ||
| PLAY MODE | ENTER |
The entire program is erased.
4 When you finish erasing programs, press
(4)(PLAY MODE) for two seconds.
5 Press (SHIFT).
Adding tracks to a program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISCTRACK
PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P 1” above.
To select Program 2, press (5) (n) repeatedly until “P 2” appears.
2 Press (2) (N) or (5) (n) to select the track slot number where you want to insert a track.
Track slot number
DISCTRACK
PLAY MODE | ENTER |
3 Push the SEEK/AMS control up or down to select the track you want to insert.
4 Press (6) (ENTER) momentarily to enter the track.
The current track in that slot number and the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2 through 4.
Note
Once all 12 slots have been filled,
“*Mem Full*” appears in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
(4)(PLAY MODE) for two seconds.
6 Press (SHIFT).
22