Erasing tracks in a program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISCTRACK
PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P 1” above.
To select Program 2, press (5) (n) repeatedly until “P 2” appears.
2 Press (2) (N) or (5) (n) to select the track you want to erase.
| Track slot number |
DISC | TRACK |
PLAY MODE | ENTER |
The track currently registered in slot 6 of Program 1.
3 Press (6) (ENTER) for two seconds.
When you erase a track from a slot number, the succeeding tracks shift up to fill the gap.
DISCTRACK
PLAY MODE | ENTER |
| µ |
DISC | TRACK |
PLAY MODE | ENTER |
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6 Press (SHIFT).
—Disc Memo (CD unit with the custom file function)
You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 25) and select the specific tracks for playback (page 25).
1 Play the CD and press (LIST) for two seconds.
DISC
2 Enter the characters.
1Rotate the dial clockwise to select the
desired characters.
(A nB nC n··· Z n0 n1 n2 n
··· 9 n+ n– n* n/ n\ n> n< n. n_ )
DISC
If you rotate the dial counterclockwise, the characters appear in the reverse order.
If you want to put a blank space between characters, select “_” (under- bar).
2Press (5) (n) after locating the desired character.
The flashing cursor moves to the next space.
DISC
If you press (2) (N), the flashing cursor moves to the left.
3Repeat steps 1 and 2 to enter the entire name.
3 To return to normal CD playback mode, press (LIST) for two seconds.
Tip
To erase/correct a name enter “_”
EN
Unit CD/MD
23