DSP functions
ProblemCause/Solution
No sound, or sound is too low. The volume of the rear speakers may have been automatically lowered in order to maximize the effect of the listening position adjustment.
nRotate the dial in a clockwise direction to adjust the balance. The speaker balance can be set separately for DSP on mode and DSP off mode (page 28).
Error displays
The following indications will flash for about five seconds, and an alarm sound will be heard.
| Display | Cause | Solution | |
|
|
|
|
|
|
| NO Mag | The disc magazine is not inserted in | Insert the disc magazine in the CD/ |
|
| the CD/MD unit. | MD unit. | |
|
|
|
|
|
|
| NO Disc | No disc is inserted in the CD/MD unit. | Insert discs in the CD/MD unit. |
|
|
|
|
|
|
| NG Discs | A CD/MD cannot play because of | Insert another CD/MD. |
|
| some problem. |
| |
EN |
| |||
|
|
|
| |
|
| A CD is dirty or inserted upside | Clean or insert the CD correctly. | |
|
|
| ||
|
| Error*1 | down.*2 |
|
|
| An MD does not play because of some | Insert another MD. | |
|
|
| ||
|
|
| problems.*2 |
|
|
|
|
| |
1 | No tracks have been recorded on an | Play an MD with tracks recorded on | ||
|
| Blank* | MD.*2 | it. |
|
|
| The CD/MD unit cannot be operated | Press the reset button of the unit. |
| PushReset because of some problem. |
| ||
|
|
| The lid of the MD unit is open or MDs | Close the lid or insert the MDs |
| Not Ready are not inserted properly. | properly. | ||
|
| HighTemp | The ambient temperature is more than | Wait until the temperature goes down |
|
| 50°C (122°F). | below 50°C (122°F). | |
|
|
|
|
|
*1 When an error occurs during playback of an MD or CD, the disc number of the MD or CD does not appear in the display.
*2 The disc number of the disc causing the error appears in the display.
If the
38