N o t e s
•The unit does not store stations with weak signals. If only a few stations are received, some number buttons will retain their former setting.
•When a number is already indicated in the display, the unit stores stations in order from the one currently displayed.
Memorising only the desired stations
You can preset up to 40 stations (10 each for FM1, FM2, MW, and LW) in the order of your choice.
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Push the SEEK/AMS control up or down to tune in the station that you want to store on the number button.
4 Press and hold the desired number button ((1) to (10)) until “MEM” appears.The number button indication appears in the display.
N o t e
If you store a new station on a number button which already has a station registered, the previously stored station will be replaced by new one.
Receiving the memorised stations
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (10)) where the desired station is stored.
If you cannot tune in a preset stationPush and release the SEEK/AMS control up or down to search for the station (automatic tuning).
Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received.
N o t e
If the automatic tuning stops too frequently, press (SHIFT), then press (4) (PLAY MODE) repeatedly until “Local” (local seek mode) is displayed. Then press (5) (n) to select “Local on.” Press (SHIFT). Only the stations with relatively strong signals will be tuned in.
T i p
If you know the frequency of the station you want to listen to, push the SEEK/AMS control up or down and hold until the desired frequency appears (manual tuning).
13