You can preset the volume level of the traffic announcements beforehand so you won’t miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level.
1 Select the desired volume level.2 Press (AF/TA) for two seconds. ”TA“ appears and the setting is stored.Presetting the RDS stations with the AF and TA data
When you preset RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations.
If an emergency announcement comes in while you are listening to the radio, the programme will automatically switch to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter which source you are listening to at the time.
1
2 Press (AF/TA) repeatedly to select either “AF on,” “TA on” or “AF TA on” (for both AF and TA functions).
Note that selecting “AF TA off” stores not only RDS stations, but also
3 Press (SHIFT), then press (4) (PLAY
MODE) repeatedly until “B.T.M” appears.
4 Press (5) (n) until “B.T.M” flashes.5 Press (SHIFT).
Presetting different settings for each preset station1 Select an FM band, and tune in the desired station.2 Press (AF/TA) repeatedly to select either “AF on,” “TA on” or “AF TA on” (for both AF and TA functions).
3 Press and hold the desired number button until “MEM” appears.
Repeat from step 1 for presetting other stations.
T i p
If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning the AF or TA function on or off.
17