If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch is set to the A position).
TIR indicatorIf you pull out the ignition key while the TIR function is on, the TIR indicator flashes a few times (only when the POWER SELECT switch is set to the A position).
TIR indicator
For more information on the TIR function, refer to “Recording the traffic announcements” (page 18).
Setting the clock
The clock uses a
Example: To set the clock to 10:08
1 Press (SHIFT), then press (3) (SET UP) repeatedly until “Clock” appears.
SET UP
1Press (5) (n).SET UP
The hour indication flashes.
2Set the hour.to go backward
to go forward
SET UP
The minute indication flashs.
4Set the minute.to go backward
to go forward
SET UP
2 Press (SHIFT).SET UP
The clock starts.
3 Press (SHIFT).After the clock setting is complete, the display return to normal playback mode.
Note
If the POWER SELECT switch on the bottom of the unit is set to the B position, turn the power on first, then set the clock.
7