Getting Started

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit.

Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen.

Reset button

Notes

•Pressing the reset button will erase the clock setting and some memorised functions.

•When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. If you insert a disc within these 10 seconds, the unit will not be reset, and you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN), then slide the front panel to the right side, and pull out from the left side.

1

2

Notes

•Be sure not to drop the panel when detaching it from the unit.

•If you detach the panel while the unit is still turned on, the power will be turned off automatically to prevent the speakers from being damaged.

•When you carry the front panel with you, use the supplied front panel case.

Attaching the front panel

Place the hole a of the front panel onto the spindle b on the unit as illustrated, then push the left side in.

a

b

µ

Notes

•Be sure not to attach the front panel upside down.

•Do not press the front panel too hard against the unit when attaching it.

•Do not press too hard or put excessive pressure on the display window of the front panel.

•Do not expose the front panel to direct sunlight or heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature.

6