Other Functions

You can also control an optional CD or MD unit with the rotary commander.

Tip

When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.

By rotating the control (the SEEK/AMS control)

Labelling the rotary commander

Depending on how you mount the rotary commander, attach appropriate the labels as shown as shown in the illustration below.

LIST

SOUND

MODE

MODE

SOUND

LIST

Rotate the control and release it to: •Locate a specific track on a disc. Rotate

and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to tune in a specific station.

Using the rotary commander

By pressing buttons(the SOURCE and MODE buttons)
By pushing in and rotating the control (the PRESET/DISC control)

(SOURCE)

 

Push in and rotate the control to:

 

•Receive the stations memorised on the

(MODE)

number buttons.

 

•Change the disc.

Each time you press (SOURCE), the source changes as follows:

TUNER nCD nMD*

*If the corresponding optional equipment is not connected, this item will not appear.

Pressing (MODE) changes the operation in the following ways;

•Tuner : FM1 nFM2 nMW nLW

•CD unit : CD1 nCD2 n…

•MD unit : MD1 nMD2 n…

21