Other operations

Rotate the VOL control to adjust the volume.

Press (ATT) to attenuate the sound.

OFF

Press (OFF) to turn off the unit.

Press (SOUND) to adjust the volume and sound menu.

Press (LIST) to:

•Display the memorised names.

•Display the programme type.

Changing the operative direction

The operative direction of controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the righthand side of the steering column, you can reverse the operative direction.

Press (SOUND) for two seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (see “Changing the sound and display settings” on page 23).

Adjusting the sound characteristics

You can adjust the equalizer curve, listening position, cut-off frequency, bass, treble, balance and fader.

You can store the bass and treble levels independently for each source.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nEQ (equalizer curve)* n POS (listening position)* n

SUB (subwoofer volume) n CNW (crossover network)* n BAS (bass) nTRE (treble) n BAL (left-right) nFAD (rear-front)

*If the corresponding optional equipment is not connected, this item will not appear.

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial function reverts volume control.)

Attenuating the sound

Press (ATT) on the supplied rotary commander or optional wireless remote.

“ATT on” lights up for a second.

To restore the previous volume level, press (ATT) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

22