Locating a station by programme type

6 Press (TIR) for two seconds to return to the original display.

tlights up.

TIR AF/TA

The unit turns on automatically and stands by for traffic announcements for four hours (two hours before and after the preset time).

If the preset station does not broadcast the traffic announcement while searching, it starts searching for other traffic programme (TP) stations.

To cancel the TIR function

Select “TIR off” in step 2 above.

Tips

•While the unit is recording the traffic announcement, t and “TA” flash.

•If the unit still cannot find a TP station, it starts searching every five minute until it finds one.

•If you pull out the ignition key while the TIR function is on, "TIR on" and tflash a few times.

Notes

•The unit also stands by for traffic announcements for two hours after you turn off the engine, as long as the TIR function is on.

•If you have a power aerial, it automatically extends every time the unit searches for a traffic programme station.

If you have a manual aerial, make sure that the aerial is fully extended.

•If you will not use your car for long time, make sure to turn off the TIR function to conserve the car battery power.

Playing back the recorded traffic announcements

When there are recorded traffic announcements you have not listened to yet,

tflashes.

1 Press (TIR).

The latest traffic announcement is played back. To listen to the previous ones, press (TIR) or + side of (SEEK/AMS).

To replay the announcements, press the – side of (SEEK/AMS).

“NO Data” appears if no traffic announcements were recorded.

2 Press (TIR) to go back to the original programme.