19
Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)
EN
CD/MD Changer
To erase Programme 2, press (4) (n)
repeatedly until “PGM 2” appears.
3Press (5) (ENTER) for two seconds.
The entire programme is erased.
4When you finish erasing programmes,
press (3) (P.MODE) for two seconds.
5Press (SHIFT).
Adding tracks to the programme
1Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display “PGM edit” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3Press either side of (SEEK/AMS) to select
the track you want to insert.
4Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem full*”
appears in the display, and you cannot insert tracks.
5When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
6Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
•“*Mem full*” appears in the display when you try to
enter more than 12 tracks into a programme at one time.
Playing the stored programme
Changing the disc order in the changer will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1Press (SHIFT).
2Press (3) (P.MODE) repeatedly until
“PGM” appears.
3Press (4) (n) repeatedly until the
desired programme appears.
Programme Play starts.
z PGM 1 z PGM 2 z PGM 1+2
PGM off Z
4Press (SHIFT).
To go back to the normal playback mode,
select “PGM off” in step 3 above.
Notes
•If you press the number button during programme
memory play, programme memory play is interrupted,
and playback of the selected disc starts.
•“NO Data” appears in the display if no track is stored in
the programme.
•If a track stored into the programme memory is not
contained in the disc magazine, the track will be skipped.
•When the disc magazine contains not a single track
stored into the programme memory, or when the
programme information has not been loaded yet, “Not
Ready” appears.
Erasing the entire programme
1Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display “PGM edit” above.
2Press (1) (N) repeatedly until “DEL”
appears.
P1 PGM edit

NO data

SUREQ
Track slot number
CD2

PGM edit

2 4 P1.‚3

SUREQ
DISC TRACK
DEL
PGM edit
--PGM1--
SUREQ