Sony CDX-C910RDS Presetting the RDS stations with the AF and TA data, Recording the traffic announcements

12
Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)
EN
Presetting the RDS
stations with the AF and
TA data
When you preset the RDS stations, the unit
stores each station’s data as well as its
frequency, so you don’t have to turn on the AF
or TA function every time you tune in the
preset station. You can select a different setting
(AF, TA, or both) for individual preset station,
or the same setting for all preset stations.
Presetting the same setting for all
preset stations
1Press (SOURCE) to select an FM band.
2Press (AF/TA) repeatedly to select either
“AF on”, “TA on” or “AF TA on” (for both
AF and TA functions).
Note that selecting “AF TA off” stores not
only RDS stations, but also non-RDS
stations.
3Press (SHIFT), then press (6) (BTM).
4Press (SHIFT).
Presetting different settings for
each preset station
1Select an FM band, and tune in the
desired station.
2Press (AF/TA) repeatedly to select either
“AF on”, “TA on” or “AF TA on” (for both
AF and TA functions).
3Press the desired number button for two
seconds until a beep sounds.
Repeat from step 1 for presetting other
stations.
Tip
If you want to change the preset AF and/or TA setting
after you tuned in the preset station, you can do so by
turning on/off the AF or TA function.
Recording the traffic
announcements
—Traffic Information Replay (TIR)
You can listen to the latest traffic
announcement by recording them. Every time
a traffic announcement starts, the unit
automatically records and stores up to eight
traffic announcements. If the recording
exceeds eight minutes, the recorded
announcements are updated, so you can
always listen to the latest information.
The TIR function turns on the unit
automatically and records the traffic
announcements for up to two hours before and
after a preset time.
Presetting the time and the station
1Press (TIR) for two seconds until “TIR”
lights up in the display.
2Press (4) (n) repeatedly until “TIR␣on”
appears.
3Press (TIR) repeatedly until the time
indication appears.
1Set the hour by rotating the dial.
2Press (4) (n) until the minute digit
flashes.
3Set the minute by rotating the dial.
4Press (TIR).
5Select the desired station by pressing the
preset number button or either side of
(SEEK/AMS).
TIR
1‚:1‚
BBC 1 FM
SUREQ
TIR
TIR on
SUREQ
TIR 7:‚‚
BBC 1 FM
SUREQ
TIR 1‚:‚‚
BBC 1 FM
SUREQ
TIR 1‚:‚‚
BBC 1 FM
SUREQ
TIR
1‚:1‚
BBC 1 FM
SUREQ