iPod
For details on the compatibility of your iPod, see “About iPod” on page 20 or visit the support site. In these Operating Instructions, “iPod” is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations.
Support site
http://esupport.sony.com
http://www.sony.com/xplod
Playing back iPod
Before connecting the iPod, turn down the volume of the unit.1Slide the USB cover.
2Connect the iPod to the USB terminal via the dock connector to USB cable.The iPod will turn on automatically, and the display will appear on the iPod screen as below.*
Tip
We recommend the
The tracks on the iPod start playing automatically from the point last played. If an iPod is already connected, to start playback press (SOURCE) repeatedly until “USB” appears. (“IPD” appears in the display when iPod is recognized.)
*If the iPod was played back in the passenger control last time, this will not appear.
3Press (MODE) to select the play mode.The mode changes as follows:RESUMING t ALBUM t TRACK t PODCAST* t GENRE t PLAYLIST t ARTIST*May not appear depending on iPod setting.
4Adjust the volume.Press (OFF) to stop playback.
Removing the iPod1Stop the iPod playback.2Remove the iPod.Notes
•Do not detach the front panel during playback of the iPod, otherwise data may be damaged.
•This unit cannot recognize iPod via a USB hub.
Tips
•When the ignition key is turned to the ACC position, and the unit is on, the iPod will be recharged.
•If the iPod is disconnected during playback, “NO DEV” appears in the display of the unit.
Resume modeWhen the iPod is connected to the dock connector, the mode of this unit changes to resume mode and playback starts in the mode set by the iPod.
In resume mode, the following buttons do not function.–(3) (REP)–(4) (SHUF)Display items
ASource (iPod) indicationBTrack name, Artist name, Album name, Track number/Elapsed playing time, ClockTo change display items B, press (DSPL).
14