Sony CDX-GT63UIW Using optional equipment, LPF, HPF, AUX, MONO, LOUD, LOCAL, DIMMER, ILLUMI, M.DSPL, A.SCRL, “REV.”, CONTRAST, ZAP.TIME, Reverse), LPF NORM/REV, BTM (page 11)

DIMMERChanges the display brightness.

–“AT”: to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.)

–“ON”: to dim the display.–“OFF”: deactivate the dimmer.CONTRAST

Adjusts the contrast of the display. The contrast level is adjustable in 7 steps.

ILLUMI (Illumination)Changes the illumination color: “ILLUMI-1,” “ILLUMI-2.”M.DSPL (Motion Display)Selects the Motion Display mode.–“SA”: to show moving patterns and spectrum analyzer.–“ON”: to show moving patterns–“OFF”: to deactivate the Motion Display.A.SCRL (Auto Scroll)Scrolls long items automatically: “ON,” “OFF.”LOCAL (Local Seek Mode)–“ON”: to only tune into stations with stronger signals.–“OFF”: to tune normal reception.MONO*2 (Monaural Mode)Selects monaural reception mode to improve poor FM reception: “ON,” “OFF.”ZAP.TIME (Zappin Time)Selects the playback time for the ZAPPIN function.–“ZAP.TIME-1 (6 seconds),” “ZAP.TIME-2 (9 seconds),” “ZAP.TIME-3 (30 seconds).”LPF (Low Pass Filter)

Selects the subwoofer cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

LPF NORM/REV (Low Pass Filter Normal/Reverse)Selects the phase when the LPF is on: “NORM,”“REV.”HPF (High Pass Filter)

Selects the front/rear speaker cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

LOUD (Loudness)Reinforces bass and treble for clear sound at low volume levels: “ON,” “OFF.”BTM (page 11)

*1 When the unit is turned off.

*2 When FM is received.

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:

Connecting the portable audio device1Turn off the portable audio device.2Turn down the volume on the unit.3Connect to the unit.

AUX

Connecting cord*

(not supplied)

*Be sure to use a straight type plug.

Adjust the volume levelBe sure to adjust the volume for each connected audio device before playback.1Turn down the volume on the unit.2Press (SOURCE) repeatedly until “AUX” appears.“AUX FRONT IN” appears.3Start playback of the portable audio device at a moderate volume.4Set your usual listening volume on the unit.5Adjust the input level (page 16).

17