Error displays/MessagesCHECKINGThe unit is confirming the connection of a USB device.tWait until confirming the connection is finished.ERROR*1

•The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly.

•A blank disc has been inserted.•The disc cannot play due to a problem. t Insert another disc.•USB device was not automatically recognized. t Reconnect it again.•Press Z to remove the disc.

FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect.

tSee the installation guide manual of this model to check the connection.

FAILURE (Illuminates for about 1 second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed.

tBe sure to receive the channel that you want to store, then try it again.HUB NO SUPRTUSB hub is not supported on this unit.LOADThe CD changer is loading the disc.tWait until loading is complete.L. SEEK +/–The local seek mode is on during automatic tuning.NO DEV (No Device)

(SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback.

tBe sure to connect a USB device and USB cable.NO DISCThe disc is not inserted in the CD changer.tInsert discs in the CD changer.NO MAGThe disc magazine is not inserted in the CD changer.tInsert the disc magazine in the CD changer.NO MUSICThe disc or USB device does not contain a music file.tInsert a music CD in this unit or an MP3 playable CD changer.tConnect a USB device with a music file in it.NO NAMEA disc/album/artist/track name is not written in the track.
OFFSETThere may be an internal malfunction.

tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.

OVERLOADUSB device is overloaded.tDisconnect the USB device, then change the source by pressing (SOURCE).

tIndicates that the USB device is out of order, or an unsupported device is connected.

READThe unit is reading all track and album information on the disc.

tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute.

RESET

The CD unit, CD changer or USB device cannot be operated due to a problem.tPress the RESET button (page 6).USB NO SUPRT (USB Not Support)The connected USB device is not supported.tConnect a USB device of Mass Storage Class.“ ” or “ ”

During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further.

“”

The character cannot be displayed with the unit.

*1 If an error occurs during playback of a CD, the disc number of the CD does not appear in the display.

*2 The disc number of the disc causing the error appears in the display.

If these solutions do not help improve the situation, consult your nearest Sony dealer.

If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.

24