Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 7) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged.

Main unit

Back of the front

 

panel

Notes

•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

•Never touch the connectors directly with your fingers or with any metal device.

Removing the unit

1Remove the protection collar.1Detach the front panel (page 7).2Pinch both edges of the protection collar, then pull it out.

x

2Remove the unit.1Insert both release keys simultaneously until they click.

Hook facing inwards.

2Pull the release keys to unseat the unit.3Slide the unit out of the mounting.

Specifications

AUDIO POWER SPECIFICATIONSCEA2006 StandardPower Output: 17 Watts RMS ⋅ 4 at 4 Ohms < 1% THD+NSN Ratio: 82 dBA(reference: 1 Watt into 4 Ohms)CD Player sectionSignal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 HzWow and flutter: Below measurable limitTuner section

FM

Tuning range: 87.5 – 107.9 MHzAntenna (aerial) terminal:External antenna (aerial) connectorIntermediate frequency: 150 kHzUsable sensitivity: 10 dBfSelectivity: 75 dB at 400 kHzSignal-to-noise ratio: 70 dB (mono)Separation: 40 dB at 1 kHzFrequency response: 20 – 15,000 Hz

AM

Tuning range: 530 – 1,710 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 25 kHzSensitivity: 26 µVUSB Player sectionInterface: USB (Full-speed)Maximum current: 500mAPower amplifier sectionOutput: Speaker outputs (sure seal connectors)Speaker impedance: 4 – 8 ohmsMaximum power output: 52 W ⋅ 4 (at 4 ohms)

continue to next page t

21