Fader & BalanceFaderAdjusts the relative level: “Front:15”– “Center”–“Rear:15.”BalanceAdjusts the sound balance: “Right:15”– “Center” – “Left:15.”AUX Level*2

Adjusts the volume level for each connected auxiliary equipment: “+18 dB”– “0 dB” – “–8 dB.”

This setting negates the need to adjust the volume level between sources.

*1 Hidden when EQ3 Parametric Preset is set to “off.” *2 When AUX source is activated.

Customizing the equalizer curve— EQ3 Parametric Tune

“Custom” of EQ3 Parametric Preset allows you to make your own equalizer settings.

Select “Custom” of EQ3 Parametric Preset.1Select a source, then press and hold the select button.2Rotate the control dial to select “EQ3 Parametric Tune,” then press it.
3Setting the equalizer curve.

You can adjust the equalizer center frequency, volume level and bandwidth in each range from “Low,” “Mid”, or “Hi.”

1Rotate the control dial until the desired menu item appears, then press the select button.

2Rotate the control dial to select the setting, then press the select button.Selectable frequency in each range: Low: 60 Hz or 100 HzMid: 500 Hz or 1.0 kHzHi: 10.0 kHz or 12.5 kHz

60Hz 100Hz

500Hz 1.0kHz

10.0kHz 12.5kHz

LOW MID HI

Adjustable volume level: “+10 dB” – “0 dB” – “–10 dB.”

+10dB

0dB

-10dB

Selectable “Q” settings in each range: Low: “0.50,” “1.00,” “1.50,” or “2.00” Mid: “0.75,” “1.00,” “1.25,” or “1.50” Hi: “0.75,” or “1.25”

You can control “Q” (the width of the range of affected frequencies) with this function.

dB

Q=1.0

1.5

2.0

2.0

1.5

1.0

Hz

Repeat steps 1 to 2 to adjust other frequency ranges.4Press (BACK) down twice.

The setting is complete and the display returns to normal play/reception mode.

To restore the factory-set equalizer curve, select “Initialize” and “Yes” in step 3.

Tip

18

Other 6 music types are also adjustable.