Getting Started

Playable discs on this unit

This unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 22)).

Type of discsLabel on the disc
CD-DAMP3WMAAAC

Resetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.

Detach the front panel (page 7) and press the RESET button (page 8) with a pointed object, such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which appears during turning off.1Press and hold the select button.The setup display appears.2Rotate the control dial until “Demo” appears, then press the select button.3Rotate the control dial to select “off.” then press the select button.The setting is complete.4Press (BACK).The display returns to normal play/reception mode.

Preparing the card remote commander

Remove the insulation film.

Tip

For how to replace the battery, see page 23.

Setting the clock

The clock uses a 12-hour digital indication.

1Press and hold the select button.

The setup display appears.

2Rotate the control dial until “Clock Adjust” appears.3Press the select button.4Rotate the control dial to set the hour, then press the select button.5Rotate the control dial to set the minute, then press the select button.To move the digital indication, press the select button/ (back) +/–.The setup is complete and the clock starts.

6