Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Rotate the control dial until the desired menu item appears, then press the select button.

3Rotate the control dial to select the setting, then press the select button.

The setting is complete.

4Press (BACK).

The display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):SetupClock Adjust (page 6)BeepActivates the beep sound: “on,” “off.”RM (Rotary Commander)Changes the operative direction of the rotary commander controls.–“NORM”: to use the rotary commander in the factory-set position.

–“REV”: when you mount the rotary commander on the right side of the steering column.

AUX Audio*1Activates the AUX source display: “on,” “off” (page 20).Auto Off

Shuts off automatically after a desired time when the unit is turned off: “NO,” “30sec (seconds),” “30min (minutes),” “60min (minutes).”

DisplayDemo (Demonstration)Activates the demonstration: “on,” “off.”ImageSets various display images.–“All”: to display all images.–“Movie”: to display a movie.–“SA 1 – 3, All”: to display the Spectrum Analyzer.–“Wall.P 1 – 3, All”: to display a wallpaper.–“off”: to not display any image.InformationDisplay the items (depending on the source, etc): “on,” “off.”
DimmerChanges the display brightness.

–“Auto”: to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.)

–“on”: to dim the display.–“off”: deactivate the dimmer.IlluminationChanges the illumination color: “Blue,” “Red,” “Green.”Auto ScrollScrolls long items automatically: “on,” “off.”Play ModeLocal (Local Seek Mode)–“on”: to only tune into stations with stronger signals.–“off”: to tune normal reception.Mono*2 (Monaural Mode)Selects monaural reception mode to improve poor FM reception: “on,” “off.”

IF

–“Auto”: to narrow automatically the reception frequency to eliminate noise.

–“Wide”*3: to always hear FM stereo broadcasts in stereo and with full the frequency signal reception.

Zappin Time*4Selects the playback time for the ZAPPIN function.–“1 (about 6 seconds),” “2 (about 9 seconds),” “3 (about 30 seconds).”BTM (page 12)

*1 When the unit is turned off.

*2 When FM is received.

*3 In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode.

*4 When CD/USB/iPod source is activated.

19