
2Remove the unit.1Insert both release keys simultaneously until they click.Signal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 HzWow and flutter: Below measurable limitTuner sectionSignal-to-noise ratio: 70 dB (mono)Separation: 40 dB at 1 kHzFrequency response: 20 – 15,000 Hz
Hook facing inwards.
2Pull the release keys to unseat the unit.3Slide the unit out of the mounting.Specifications
AUDIO POWER SPECIFICATIONSCEA2006 StandardPower Output: 17 Watts RMS ⋅ 4 at 4 Ohms < 1% THD+NSN Ratio: 82 dBA(reference: 1 Watt into 4 Ohms)CD Player sectionFM
Tuning range: 87.5 – 107.9 MHzAntenna (aerial) terminal:External antenna (aerial) connectorIntermediate frequency: 150 kHzUsable sensitivity: 10 dBfSelectivity: 75 dB at 400 kHzAM
Tuning range: 530 – 1,710 kHzAntenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz24 Sensitivity: 26 µVUSB Player sectionInterface: USB (Full-speed) Maximum current: 500mAPower amplifier sectionOutput: Speaker outputs (sure seal connectors)Speaker impedance: 4 – 8 ohmsMaximum power output: 52 W ⋅ 4 (at 4 ohms)GeneralOutputs:Audio outputs terminal (front/rear) Subwoofer output terminal (mono)Power antenna (aerial) relay control terminal Power amplifier control terminalInputs:Remote controller input terminalAntenna (aerial) input terminalTelephone ATT control terminalIllumination control terminalBUS control input terminalBUS audio input terminalAUX input jack (stereo mini jack)USB signal input terminalTone controls:Low: ±10 dB at 60 Hz (XPLOD)Mid: ±10 dB at 1 kHz (XPLOD)High: ±10 dB at 10 kHz (XPLOD) Power requirements: 12 V DC car batteryRM-X172 Parts for installation and connections (1 set)Optional accessories/equipment:Rotary commander: RM-X4S BUS cable (supplied with an RCA pin cord): RC-61 (1 m), RC-62 (2 m)CD changer (10 discs): CDX-757MX CD changer (6 discs): CDX-T69 Source selector: XA-C40 AUX-IN selector: XA-300 USB connection cable for iPod: RC-100IP HD RadioTM tuner: XT-100HD
(negative ground (earth)) Dimensions: Approx. 178 ⋅ 50 ⋅ 182 mm
(7 1/8 ⋅ 2 ⋅ 7 1/4 in) (w/h/d)Mounting dimensions: Approx. 182 ⋅ 53 ⋅ 162 mm (7 1/4 ⋅ 2 1/8 ⋅ 6 1/2 in) (w/h/d)
Mass: Approx. 1.3 kg (2 lb 14 oz)Supplied accessories:Card remote commander:Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.
Design and specifications are subject to change without notice.
•Halogenated flame retardants are not used in the certain printed wiring boards.
•Halogenated flame retardants are not used in cabinets.
•Packaging cushions are made from paper.