iPod

For details on the compatibility of your iPod, see “About iPod” on page 20 or visit the support site.

In these Operating Instructions, “iPod” is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations.

Support site

For customers in the U.S.A. and Canada:

http://esupport.sony.com

http://www.xplodsony.com/

For customers in Europe:

http://support.sony-europe.com

For customers in Latin America:

http://esupport.sony.com/ES/LA/

For customers in Pan Asia:

http://www.sony-asia.com/section/support http://www.sony-asia.com/caraudio/

Playing back iPod

Before connecting the iPod, turn down the volume of the unit.

1Remove the USB cap from the USB connector and connect the iPod to the USB connector via the dock connector to USB cable.

If an iPod is already connected, to start playback press (SOURCE) repeatedly until “USB” appears. (“IPD” appears in the display when iPod is recognized.)

*If the iPod was played back in the passenger control last time, this will not appear.

2Press (MODE) to select the play mode.The mode changes as follows:RESUMING t ALBUM t TRACK t PODCAST* t GENRE t PLAYLIST t ARTIST

*May not appear depending on iPod setting.

3Adjust the volume.

Press (OFF) to stop playback.

Removing the iPod1Stop the iPod playback.2Remove the iPod.

Caution for iPhone

When you connect an iPhone via USB, telephone volume is controlled by iPhone itself. In order to avoid sudden loud sound after a call, do not increase the volume on the unit during a telephone call.

Note

This unit cannot recognize iPod via a USB hub.

Tips

•We recommend the RC-100IP USB cable (not supplied) to connect the dock connector.

•When the ignition key is turned to the ACC position, and the unit is on, the iPod will be recharged.

•If the iPod is disconnected during playback, “NO DEV” appears in the display of the unit.

Resume mode

When the iPod is connected to the dock connector, the mode of this unit changes to resume mode and playback starts in the mode set by the iPod.

In resume mode, the following buttons do not function.– (3) (REP)– (4) (SHUF)

The iPod will turn on automatically, and the display will appear on the iPod screen as below.*

The tracks on the iPod start playing automatically from the point last played.

14