Removing the unit

1Remove the protection collar.1Detach the front panel (page 7).2Pinch both edges of the protection collar, then pull it out.

x

2Remove the unit.1Insert both release keys simultaneously until they click.

Hook facing inwards.

2Pull the release keys to unseat the unit.3Slide the unit out of the mounting.

22

Specifications

AUDIO POWER SPECIFICATIONS

CEA2006 Standard

Power Output: 17 Watts RMS ⋅ 4 at 4 Ohms < 1% THD+N

SN Ratio: 82 dBA

(reference: 1 Watt into 4 Ohms)

CD Player sectionSignal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

FM

Tuning range:

87.5– 108.0 MHz (at 50 kHz step)

87.5– 107.9 MHz (at 200 kHz step)

FM tuning interval: 50 kHz/200 kHz switchable

Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency: 150 kHz Usable sensitivity: 10 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 70 dB (mono) Separation: 40 dB at 1 kHz Frequency response: 20 – 15,000 Hz

AM

Tuning range:

531 – 1,602 kHz (at 9 kHz step)

530 – 1,710 kHz (at 10 kHz step)

AM tuning interval: 9kHz/10kHz switchable

Antenna (aerial) terminal:

External antenna (aerial) connector Intermediate frequency: 25 kHz Sensitivity: 26 µV

USB Player section

Interface: USB (Full-speed)

Maximum current: 500mAPower amplifier section

Output: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohmsMaximum power output: 52 W ⋅ 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front/rear) Subwoofer output terminal (mono)

Power antenna (aerial) relay control terminal Power amplifier control terminal

Inputs:

Remote controller input terminal

Antenna (aerial) input terminal

Telephone ATT control terminal

Illumination control terminal

BUS control input terminal

BUS audio input terminal

AUX input jack (stereo mini jack)

USB signal input terminal