JMODE button page 11, 14, 15Press to: Select the radio band (FM/AM)*1/ select the play mode of iPod.Press and hold to: Enter/cancel the passenger control.K (BROWSE) button page 10To enter the Quick-BrowZer mode.LBTM/CAT*2 button page 11To start the BTM function (press and hold).MFrequency select switch (located on the bottom of the unit)See “Frequency select switch” in the supplied installation/connections manual.NNumber buttons

CD/USB:

(1)/(2): ALBUM –/+(during MP3/WMA/ AAC playback)To skip albums (press); skip albums continuously (press and hold).(3): REP page 12, 13, 15(4): SHUF page 12, 13, 15(5): DM+Improves digitally compressed sound, such as MP3.To activate the DM+ function, set “ON.” To cancel, set “OFF.”(6): PAUSETo pause playback. To cancel, press again.

Radio:

To receive stored stations (press); store stations (press and hold).ODSPL (display)/SCRL (scroll) button page 12, 13, 15To change display items (press); scroll the display item (press and hold).PAUX input jack page 18To connect a portable audio device.QRESET button page 6RZ (eject) buttonTo eject the disc.SDisc slotTo insert the disc.

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 6).

w; < (.)/, (>) buttonsTo control CD/radio/USB, the same as (SEEK) –/+ on the unit.Setup, sound setting, etc., can be operated by < ,.wa DSPL (display) button page 12, 13, 15 To change display items.ws VOL (volume) +/– button To adjust volume.wd ATT (attenuate) buttonTo attenuate the sound. To cancel, press again.wf SEL (select) buttonThe same as the select button on the unit.wg M (+)/m (–) buttonsTo control CD/USB, the same as (1)/(2) (ALBUM –/+) on the unit.Setup, sound setting, etc., can be operated by M m.wh SCRL (scroll) buttonTo scroll the display item.wj Number buttons

To receive stored stations (press); store stations (press and hold).

*1 In the case of a CD changer, HD Radio tuner or SAT tuner being connected; when (SOURCE) is pressed, the connected device (“HD,” “XM” or “SR”) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, HD Radio tuner band or SAT tuner band.

*2 When the SAT tuner is connected.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

9