5Connect the power cord to a wall outlet.

If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). To turn on the system, press ?/1.

6(Asian and Oceanian models only) Set the color system to PAL or NTSC depending on the color system of your TV.

The color system is factory set to NTSC for region code 3 models, and PAL for other region code models. Each time you perform the procedure below, the color system changes as follows:

NTSC y PAL

1Press DVD N (or DVD NX on the unit) to switch the function to DVD.

2Press x to stop playback.

3Press ?/1 to turn off the system.

4Press ?/1 on the unit while holding down x on the unit.

The system turns on and the color system is changed.

Notes

•A disturbance in the TV screen may be present for a moment after changing the color system as described above.

•When you play back a VIDEO CD recorded in a different color system from the one you set to the unit, the picture image may be distorted.

•To set the VCD color system, see page 21.

To connect optional components

See page 37.

Inserting two R6 (size AA) batteries into the remote

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

10GB