Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. North American model is used for illustration purpose.
TV or VCR, etc. |
| Amplifier or MD deck |
|
|
|
From the audio output jack of the connected component
To the digital input jack of the digital component
Use a digital optical cord (square, not supplied) to connect an amplifier, MD deck or DAT deck with a digital optical input jack. Sound is then output when the system function is set to DVD. By connecting this system to the optical input jack of the optional amplifier equipped with Dolby Digital or DTS decoder, you can enjoy the 5.1 channel sound.
In addition, when the CD or DVD audio is linear PCM, you can make a digital recording from this system to an MD deck or DAT deck.
Notes
•When playing a VIDEO CD or MP3 audio tracks, you cannot output digital audio.
•You can record digital audio from this system only when DVD function is selected.
•You cannot make a digital recording of a copy guarded disc using a digital component connected to this system. Also, playback may not be possible depending on the connected component.
•DVD linear PCM output is output at a sampling frequency of 48 kHz regardless of the disc being played back.
•When you connect a component that does not support Dolby Digital or DTS to the DIGITAL OUT (OPTICAL) jack and output a Dolby Digital or DTS bit stream, noise may be heard from the connected component.
BTV IN L/R jacksUse audio cords (not supplied) to connect an optional analog component (TV or VCR, etc.) to these jacks. You can then record or listen to from the component through this system.