Press ENTER.
Press x to stop playback.
Press DVD SETUP in stop mode.
Press ?/1 to turn on the system.
Press DVD N (or DVD NX on the unit) to switch the function to DVD.
Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.

Setting the clock

Use buttons on the remote for the operation.

1

2

3 Press . or > repeatedly to set the hour.

4

5 Press . or > repeatedly to set the minute.6 Press ENTER.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET.

2Press . or > to select “CLOCK SET”, then press ENTER.

3Do the same procedures as step 3 to 6 above.

Notes

•The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

•You cannot set the clock in Power Saving Mode (page 34).

Selecting a language

You can change the on-screen display language.

1 Turn on your TV and select the video input.

2

3

4

5

6 Press < or , repeatedly to select “Language”, then press ENTER.7 Press M or m repeatedly to select “OSD”, then press ENTER.

8 Press M or m repeatedly to select a language from the displayed list, then press ENTER.

9 Press DVD SETUP to turn off the Setup Display.

Note

Pressing DVD SETUP in step 5 does not work when using a JPEG disc. Eject the disc before making the setting.

Started Getting

11GB