Set another station to the existing preset number
Tune in a station with a weak signal
To
Other operations
“COMPLETE” appears.
Press ENTER.
Press TUNER MEMORY.
Press ENTER.
5
Start over from step 1. After step 3, press PRESET + or – repeatedly to select the preset number you want to store the other station.
Do this
Follow the procedure described in “Manual tuning preset”.
Press PRESET + or – repeatedly to select the desired preset number.
4
5
6 Repeat steps 1 through 5 to store other stations.
A preset number flashes.
Perform steps 4 and 5 while the preset number flashes.
Press TUNING + or – repeatedly to tune in the desired station.
1 Press TUNER BAND repeatedly to select “FM” or “AM”.
2
3
“COMPLETE” appears.
6 Repeat steps 1 through 5 to store other stations.
Manual tuning preset
You can manually tune in and store the radio frequency of the desired stations.
4 Press PRESET + or – repeatedly to select the desired preset number.

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number.

Automatic tuning preset

You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.

1 Press TUNER BAND repeatedly to select “FM” or “AM”.

2 Press and hold TUNING + or – until the frequency indication starts to change, then release it.

The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for an FM stereo program) appear.

If “TUNED” does not appear and the scanning does not stop

Set the frequency of the desired radio station as described in steps 2 through 6 of “Manual tuning preset”.

3 Press TUNER MEMORY.

A preset number flashes.

Perform steps 4 and 5 while the preset number flashes.

Preset number

Tuner

continued

25GB