* Except for Rating (Parental Control) settings
Note
Pressing DVD SETUP in step 1 does not work when using a JPEG disc. Eject the disc before resetting the system.
If the system still does not

 

 

Messages

 

operate properly after performing

 

the above measures, reset the

One of the following messages may appear or

system as follows:

Use buttons on the unit for the operation.

flash in the display during operation.

DVD/VIDEO CD/CD/MP3/JPEG

1

Remove the disc if it is loaded.

 

 

2

 

 

 

Disconnect the power cord.

CAN’T PLAY

3

Reconnect the power cord.

• A disc that cannot be played was inserted.

• A disc with an unsupported Region code was

4

Press ?/1 to turn on the system.

inserted.

5

Press DVD NX to switch the function to

 

 

NO DISC

 

DVD and make sure that “NO DISC” is

There is no disc in the unit.

 

displayed.

 

 

6

NOT IN USE

 

Press x, PLAY MODE and DVD NX at the

You pressed an invalid button.

 

same time.

 

 

 

 

 

The system is reset to the factory settings except

Tape

for DVD settings. You should set the settings

you made, such as the preset stations, clock, and

 

 

NO TAB

timer.

You cannot record the tape because the tab has been

 

 

To return the DVD setup to the

removed from the cassette.

default settings*, perform resetNO TAPE
as follows:

There is no tape in the tape deck.

The operation can only be set using the TV

TAPE ERR

A malfunction of the tape deck has occurred.

screen.

1

Press DVD SETUP in stop mode.

 

 

 

 

2

Press < or , repeatedly to select “Reset”,

 

 

 

then press ENTER.

 

 

3

Press < or , repeatedly to select “YES”,

 

 

 

then press ENTER.

 

 

It takes a few seconds to complete. Do not press ?/1 when resetting the system.

44GB