Listening to audio from a connected component
Use buttons on the unit for the operation.
1 Connect audio cords.See “Hooking up optional components” on page 37.
2 Press TV to switch the function to TV.3 Start playing the connected component.Enjoying the 5.1 channel sound with the optional amplifier
1 Connect a digital optical cord.See “Hooking up optional components” on page 37.
2 Connect 6 speakers to an AV amplifier equipped with a decoder.For the speaker placement, refer to the operating instructions supplied with the connected amplifier.
3 Press DVD SETUP in stop mode.The Setup Display appears.
4 Press < or , repeatedly to select “AV”, then press ENTER.5 Press M or m repeatedly to select “Dolby Digital” or “DTS”, then pressENTER.
6 Press M or m repeatedly to select “BitStream”, then press ENTER.7 Press DVD SETUP to turn off the Setup Display.8 Switch the output to 5.1 channel Dolby Digital sound or 5.1 channel DTS sound.
See “Changing the sound/subtitle/angle” on page 19.
Note
If “Dolby Digital” or “DTS” is set to “Bit Stream”, sound is not output from the supplied speakers and optional headphone does not function.
38GB