3Attach the speakers.

Facing the front of the unit, attach the speaker connected to the SPEAKER R jack onto the right side of the unit and the speaker connected to the SPEAKER L jack onto the left side of the unit.

3Reinstall the rear cover.

Put the wires through the hole at the bottom of the rear cover.

Note on the glass door of CD player

The CD player cover of the CMT-ED1 is made of tempered glass.

Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass. This glass, however, may shatter if it receives a sharp blow or if it is scratched.

To detach the speakers

1Slide the speakers in the opposite direction of the arrows of the

illustration in “Attach the speakers” (see step 2 -3on this page.)

2After detaching the speakers, set the speaker cords into the speaker cord groove at the bottom of the speaker. Otherwise, the speaker cord could be damaged.

Groove

4Turn the unit upside down holding the glass door with firm hand and set the speaker cord into a groove of the unit.

5Connect the mains lead to mains.

continued

5