Recording CD by specifying the track order
— Programme Edit
You can record tracks from the CD in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
1 Place a CD and close the glass door.
2 Insert a blank tape into the deck.
3 Press FUNCTION repeatedly until “CD” appears.
4 Press TUNING/PLAY MODE on the remote repeatedly until “PGM” appears.
1/u
(Power)
1
REC lamp
CD SYNC lamp
5 Press
±on the remote) until the desired track appears.
PGM
12
¹
3
5
2
| 1/u |
8,12 | (Power) |
p |
5
11 
10 
4
6
Track number Total playing time (including selected track)
6 Press ENTER on the remote.
7 Repeat steps 5 and 6 to programme additional tracks to be recorded on side A in the order you want them to be recorded.
8 Press ¸on the remote to insert a pause at the end of side A.
9 Repeat steps 5 and 6 to programme the tracks to be recorded on side B.
10Press rREC on the remote.
The deck stands by for recording and the CD SYNC and REC lamps on the unit light up red.
continued 23