Listening to the radio

— Preset Tuning

Before using this function, preset radio stations in the tuner’s memory (see “Step 3: Presetting radio stations”).

1/u

(Power)

2

4

1

VOLUME +/–

 

1/u

 

(Power)

2

4

STEREO/

3

MONO

 

 

VOL

 

+/–

1 Press FUNCTION repeatedly until “FM” or “AM” appears.

2 Press FM or AM (or TUNER/BAND on the remote repeatedly).

3 Press TUNING/PLAY MODE on the remote repeatedly until “PRESET” appears.

4 Press TUNING +/– (or -/± on the remote) to tune in the desired preset station.

PRESET

TUNED ST

MHz

Preset Frequency number

To

Do this

Turn off the radio

Press 1/u.

 

 

Adjust the volume

Press VOLUME +/– (or

 

VOL +/– on the remote).

 

 

To listen to non-preset radio stations

Press TUNING/PLAY MODE on the remote repeatedly in step 3 until “MANUAL” appears, then press TUNING +/– (or -/±on the remote) to tune in the desired station.

Tips

•Pressing TUNER/BAND on the remote while the power is off automatically turns on the power and tunes to the last received station (One Touch Play).

•You can switch from another source to the radio just by pressing TUNER/BAND on the remote (Automatic Source Selection).

•If an FM programme is noisy, press STEREO/ MONO on the remote repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve. Press this button again to restore the stereo effect.

•To improve broadcast reception, remove the rear cover and put the aerial out of the cabinet (see “To remove the AM aerial” on page 6 ).

Operations Basic

15