1 Prepare the music source you want to play.

•CD: Insert a CD. To start from a specific track, create a programme (see “Programming CD tracks”).

•Tape: Insert an tape with the side you want to play facing forward.

•Radio: Tune in the preset station you

want (see “Step 3: Presetting radio stations”).

2 Press VOLUME +/– (or VOL +/– on the remote) to adjust the volume.

3 Press TIMER SET on the remote.

4 Press -or ±to display “DAILY”, and then press ENTER on the remote.

“ON” appears and the hour indication flashes.

DAILY

5 Set the time to start playing.

Press -or ±to set the hour, then press ENTER on the remote.

The minutes indication flashes.

DAILY

6 Set the time to stop playing following the above procedure.

7 Press -or ±until the music source you want appears.

The indication changes as follows:

CD nFM/AM nTC nMD n

8 Press ENTER on the remote.

The start time, the stop time, and the music source appear in turn before the original display returns.

9 Turn off the power.

To check the setting

Press TIMER SELECT on the remote repeatedly until “DAILY” and “TIMER REC” disappear, then press TIMER SELECT again.

The preset items appear sequentially.

To cancel the timer operation

Press TIMER SELECT on the remote repeatedly until “OFF” appears.

Notes

•The system turns on 15 seconds before the preset time.

•You cannot set the timer if the timer on and off times are the same.

•When you set the Sleep Timer, the Daily Timer will not turn on the system until the Sleep Timer turns it off.

•You cannot activate the Daily Timer and Timer- recording at the same time.

27