![](/images/backgrounds/18909/18909-3614x1.png)
Recording a CD
— CD Synchro Recording
This function lets you record from a CD to a tape easily.You can use TYPE I (normal) or TYPE II (CrO2) tapes.
1/u
(Power)2,3
REC lamp
CD SYNC lamp
7
¹
4 1
1/u
(Power)
7
p
DOLBY NR
6 5
1 Press ¤PUSH of the front cover and insert a blank tape into the deck.
With the side you want to record on facing forward
2 Open the glass door and place a CD (see page 12).
3 Close the glass door.
4 Press FUNCTION repeatedly until “CD” appears.
5 Press rREC on the remote.
The deck stands by for recording, and the CD SYNC and REC lamps on the unit light up red.
6 Press DIR MODE on the remote
repeatedly to selectto record
on one side orto record on both sides.
7 Press ¸.
Recording starts from the front side. After about 10 seconds, the CD starts playing.
To stop recording
Press ¹.
Tips
•When you insert a new tape, the CD starts playing after 10 seconds.
•When you want to reduce the hiss noise in low- level
Notes
•You cannot listen to other sources while recording.
•You cannot record from the reverse side.
14