Sony CMT-EX200 Programing CD tracks, Playing a CD (continued), — Program Play, 1Press >10, 2Enter the corresponding number buttons

Press PLAY MODE on the remote repeatedly until “ PGM” appears.

Playing a CD (continued)

Other Operations

To	Do this
Stop play	Press x.
Pause	Press NX(or Xon the remote).
	Press again to resume play.
Select a track	Press .or >repeatedly until
	you find the desired track.
Find a point in	Keep pressing mor Mduring
a track	play and release it at the desired
	point.
Remove a CD	Touch OPEN/CLOSE Z(or press
	OPEN/CLOSE Zon the remote).
Play repeatedly	Press REPEAT on the remote
(Repeat Play)	during play until “ REP” or
	“ REP 1” appears.
	REP: For all the tracks on the CD.
	REP 1*: For a single track only.
	To cancel playing repeatedly, press
	REPEAT on the remote until

“REP” or “ REP 1” disappears.

*You cannot repeat only one track during Shuffle Play and Program Play.

Tip

If you press a number button on the remote, the track corresponding to the pressed number on the disc starts playing (Track Direct Play).

To enter track number 10 or over on the remote

1Press >10.

2Enter the corresponding number buttons.

To enter 0, press 10/0 instead.

Example:

To enter track number 30, press >10, then 3 and 10/0.

Notes

•Do not forcibly press the disc down with your finger, as this may cause CD player trouble. Furthermore, do not obstruct the ejecting CD. Be sure to touch OPEN/CLOSE Z(or press OPEN/ CLOSE Zon the remote) to lower the disc tray.

•The disc tray will not operate if you touch OPEN/ CLOSE Zwhile wearing gloves. Touch OPEN/ CLOSE Zwith bare hands or press OPEN/ CLOSE Zon the remote.

Programing CD tracks

— Program Play

You can make a program of up to 24 tracks.

1 Press FUNCTION repeatedly to switch the function to CD.

2

3 Press .or >repeatedly until the desired track number appears.

Playing time of the selected track

Track number

4 Press ENTER on the remote.

The track is programed.

The total playing time of the program and the number of the last programed track are displayed.

5 To program additional tracks, repeat steps 3 and 4.

6 Press NX(or CD Non the remote). Other Operations

To	Do this
Cancel Program	Press PLAY MODE on the
Play	remote repeatedly until “ PGM”
	and “ SHUF” disappear.
Clear the entire	Press xin stop mode.
program
Select the desired	Press number buttons on the
track using	remote instead of performing
number buttons	steps 3 to 5.

Tips

•The program you made remains after Program Play finishes. To play the same program again, press NX(or CD Non the remote).

•When the total playing time has exceeded

100 minutes, the time is not displayed and the total number of programed tracks is displayed.

12