7 Press . or > repeatedly to select the desired sound source.The indication changes as follows:

*Select “ PC/TAPE” to use an optional component connected to the PC/TAPE jacks as the sound source.

8 Press ENTER on the remote.

The start time, the stop time, and the sound source appear in turn, before the original display returns. “ DAILY” lights up.

9 Press ?/1 to turn off the system.

Other Operations

To

Do this

Check the setting

Press CLOCK/TIMER

 

SELECT on the remote

 

repeatedly until “ DAILY”

 

appears. The start time,

 

followed by the stop time, the

 

sound source appears, then

 

original display appears.

 

 

Change the setting

Start over from step 1.

 

 

Cancel the timer

Press CLOCK/TIMER

 

SELECT on the remote

 

repeatedly until “ TIMER

 

OFF” appears.

 

 

Notes

If the system is on about 30 seconds before the preset time, the Daily Timer will not be activated.

Do not operate the system from the time the system turns on until the play starts (about 30 seconds before the preset time).

Once you set the Daily Timer, it functions every day until you cancel it.

Optional Components

Hooking up the optional

components

You can connect a digital or an analog component to this system.To connect optional components, remove the small rear cover first.

To the audio input

To the audio output

jacks of an optional

jacks of an optional

component

component

 

 

Timer/Optional

PHONES jack

of a digital component

Components

To the digital input jack

 

To

Do this

 

Make a digital

Connect a optical cable.

 

recording to a

 

 

digital component

 

 

Make an analog

Connect the audio cords.

 

recording to an

 

 

analog component

 

 

Listen to the

Press FUNCTION repeatedly

 

connected optional

until “ PC/TAPE” appears (or

 

component

press PC/TAPE on the remote).

 

Listen through the

Connect the headphones to the

 

headphones

PHONES jack.

 

17