Press . or > repeatedly to set the hour, then press ENTER on the remote. The minute indication flashes.
Press . or > repeatedly to set the minute, then press ENTER on the remote. The hour indication flashes again.
6 Set the time to stop playing following the procedure in step 5.
The sound source indication flashes.
Set the time to start playing.
5
Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “ Setting the time” on page 10).
1 Prepare the sound source you want to play.
• CD: Place a CD. To start from a specific track, make a program (see
“ Programing CD tracks” on page 12).
• Radio: Tune in a station (see
“ Listening to the radio” on page 14).
• Tape: Make the same setting on the timer of the component connected to the PC/TAPE jacks.
2 Press VOL –or + to adjust the volume.
3 Press CLOCK/TIMER SET on the remote.
4 Press . or > repeatedly until “ TIMER SET” appears, then press ENTER on the remote.
The hour indication flashes.
Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Press SLEEP on the remote to select a desired time.Each time you press the button, the minute display (the
*The system automatically turns off after the current CD finishes playing (up to 100 minutes).
When the function is TUNER, the system turns off in 100 minutes.
Other Operations
To | Press |
Check the | SLEEP on the remote once. |
remaining time |
|
|
|
Change the time | SLEEP on the remote repeatedly to |
to turn off | select the time you want. |
|
|
Cancel the Sleep | SLEEP on the remote repeatedly |
Timer function | until “ OFF” appears. |
|
|
Note
When the Sleep Timer is used, you cannot use the Daily Timer.
16