Turn on the system.

Replacing the battery in

the remote

1 Slide out and remove the battery case.2 Insert a new lithium battery CR2025 with the + side facing up.

A lithium battery CR2025

3 Slide the battery case back in.

Tip

When the remote no longer operates the system, replace the battery with a new one.

Notes

If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage.

Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommend by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble or dispose of in fire.

Setting the time

1

2 Press CLOCK/TIMER SET on the remote.Proceed to step 4 when you set the clock for the first time.

3 Press . or > repeatedly to select “CLOCK SET”, then press ENTER on the remote.

The day indication flashes.4 Press . or > repeatedly to set the day, then press ENTER on the remote.The hour indication flashes.5 Press . or > repeatedly to set the hour, then press ENTER on the remote.The minute indication flashes.6 Press . or > repeatedly to set the minute, then press ENTER on the remote.The clock starts working.

Tip

If you made a mistake or want to change the time, start over from step 1.

Turning off the clock display in standby modePress DISPLAY on the remote while the system is off.To turn on the clock display, press DISPLAY on the remote again.

Notes

When the Daily Timer is set, you cannot turn off the clock display.

The clock display will appear when you set the Daily Timer during turning off the display.

10