Sony CMT-EX200 Messages, Specifications, continued, Tuner section, Canadian model:, FM tuner section, Amplifier section, CD player section, For the U.S. model

Messages

One of the following messages may appear or flash in the display during operation.

CD

NO DISC

There is no CD.

OVER

You have reached the end of the CD while pressing M during play or pause.

STEP FULL

You tried to program 25 or more tracks (steps).

Specifications

Main Unit (HCD-EX200)Amplifier sectionFor the U.S. modelAUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 4 ohms loads, both channels driven, from 120 –10,000 Hz; rated 12 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output.

Canadian model:

Continuous RMS power output (Reference): 15 + 15 watts

(4 ohms at 1 kHz, 10% THD)

Inputs
PC/TAPE IN:	voltage 250 mV,
Outputs	impedance 47 kilohms
PC/TAPE OUT:	voltage 250 mV,
	impedance 1 kilohms
CD DIGITAL OUT:	Optical
PHONES (stereo mini jack):
	accepts headphones of
	8 ohms or more
CD player section
System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ =780 nm)
	Emission duration:
	continuous
Frequency response	20 Hz –20,000 Hz

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section
Tuning range	87.5 –108.0 MHz
	(100 kHz step)
Antenna	FM wire antenna
Antenna terminals	75 ohms unbalanced
Intermediate frequency	10.7 MHz
		continued

Information Additional

21