Sony CMT-EX200 Specifications (continued), General, Canadian model:, AM tuner section, Amplifier section, For the U.S. model, Sub woofer (SA-WEX200)

Specifications (continued)

AM tuner section
Tuning range	530 –1,710 kHz
	(with the interval set at
	10 kHz)
	531 –1,710 kHz
	(with the interval set at
	9 kHz)
Antenna	AM loop antenna
	External antenna terminals
Intermediate frequency	450 kHz
Satellite speaker (SS-CEX200)
Speaker system	2-way, bass-reflex type
Speaker units
Woofer:	9 cm dia., cone type
Tweeter:	5 cm dia., cone type
Impedance	4 ohms
Dimensions	130 ⋅ 220 ⋅ 183 mm
	(w/h/d, incl. projecting
	parts and controls)
Mass	Approx 2.0 kg net per
	speaker
General
Power requirements	120 V AC, 60 Hz
Power consumption	40 watts
	1.8 watts (in standby
	mode)
Dimensions	175 ⋅ 222 ⋅ 201 mm
	(w/h/d, incl. projecting
	parts and controls)
Mass	Approx. 3.2 kg
Supplied accessories	Remote commander with
	battery (1)
	AM loop antenna (1)
	FM wire antenna (1)
	Speaker cords (4)

Sub woofer (SA-WEX200)

Amplifier section

For the U.S. model

AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 4 ohms loads, from 50 –150 Hz; rated 30 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output.

Canadian model:

Continuous RMS power output (reference): 30 watts

(4 ohms at 55 Hz, 10% THD)

Speaker system	Active sub woofer
	(magnetically shielded
	design)
Speaker unit	10 cm dia, cone type
	woofer (⋅ 2)

Practical maximum output 30 watts

Reproduction frequency range

	45 –150 Hz
High frequency cut-off range
	70 –150 Hz
Phase selector	Normal, reverse
Input	SPEAKER INPUT:
	Input terminal
Output	SPEAKER OUTPUT:
	Output terminal
Power requirements	120 V AC, 60 Hz
Power consumption	40 watts
Dimensions	Approx. 150 ⋅ 220 ⋅
	345 mm (w/h/d, incl.
	projecting parts and
	controls)
Mass	Approx. 6.2 kg

Design and specifications are subject to change without notice.

22