Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number.
Automatic tuning presetYou can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.2 Press TUNING MODE repeatedly until “AUTO” appears in the display.3 Press +/– (or TUNING +/– on the unit).The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo program only) appear.
If “TUNED” does not appear and the scanning does not stopSet the frequency of the desired radio station as described in steps 2 and 3 of “Manual tuning preset” (page 12).
4 Press TUNER MEMORY.A preset number flashes. Perform steps 5 and 6 while the preset number flashes.
Preset number
5 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset number.
6
7 Repeat steps 3 through 6 to preset other stations.Tip
Press x to stop scanning.
Manual tuning presetYou can manually tune in and store the radio frequency of the desired stations.
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press TUNING MODE on the unitrepeatedly until “AUTO” and “PRESET” disappear from the display.3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.
4
5 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset number.
6
7 Repeat steps 3 through 6 to preset other stations.
Other OperationsTo | Do this |
Tune in a station | Follow the procedure described |
with a weak signal | |
| |
|
|
Set another station | After step 4, press +/– (or |
to the existing | TUNING +/– on the unit) |
preset number | repeatedly to select the preset |
| number you want to store the |
| station. |
|
|