To change the AM tuning interval (except for European model and Saudi Arabian model)
The AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power by pressing ?/1. While holding TUNING +, press ?/1. When you change the interval, all the AM preset stations are initialized. To reset the interval, repeat the same procedure.
Note
You cannot change the setting in Power Saving Mode.
Tips
•The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.
•To improve the reception, adjust the supplied antennas or connect an external antenna.
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 12).
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until “PRESET” appears in the display.
3 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset station.
Listening to non-preset radio station
— Manual Tuning
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.
3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.
continued