•Set the volume of the connected component lower.
If the system still does not operate properly after performing the above measures, reset the system as follows:
Use buttons on the unit for the operation.
1Disconnect the power cord.
2Reconnect the power cord.
3Press ?/1 to turn on the system.
4Press x, ?/1 and turn volume to the left at the same time.
The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer.
Messages
One of the following messages may appear or flash in the display during operation.
CD/MP3NO DISCThere is no disc in the player.
NO STEPAll of the programed tracks have been erased.
OVERYou have reached the end of the disc while pressing and holding M during playback or pause.
FULLYou tried to program 26 or more tracks (steps).
PUSH STOPYou pressed PLAY MODE during playback.
Tuner
COMPLETEThe preset operation ended normally.
TapeNO TABYou cannot record the tape because the tab has been removed from the cassette.
NO TAPEThere is no tape in the tape deck.
Timer
SET CLOCKYou tried to select the timer with the clock not set.
PUSH SELECTYou tried to set the clock or timer during timer operation.
SET TIMERYou tried to select the timer when Play Timer or Rec Timer are not set.
TIME NGPlay Timer or Rec Timer start and end times are set to the same time.