Waking up to music

— Play Timer

You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 8).

Use buttons on the remote for the operation.

1 Prepare the sound source you want to play.

CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 11).

TAPE: Load a tape (see “Playing a tape” on page 15).

TUNER: Tune in a radio station (see “Listening to the radio” on page 13).

2 Adjust the volume.

3 Press CLOCK/TIMER SET.

4 Press ./> repeatedly until “PLAY” appears, then press ENTER.

“ON TIME” appears and the hour indication flashes.

5 Set the time to start playing.

Press ./> repeatedly to set the hour, then press ENTER.

The minute indication flashes.

Press ./> repeatedly to set the minute, then press ENTER.

6 Set the time to stop playing following the same procedure as step 5.

7 Press ./> repeatedly until the desired sound source appears.

Each time you press the button, the display changes cyclically as follows:

tTUNER y CD T t TAPE T

8 Press ENTER.

The start time, the stop time and the sound source, then the original display returns.

9 Press ?/1 to turn off the system.

Other operations

To

Do this

Cancel the timer/

1

Press CLOCK/TIMER

activate the timer/

 

SELECT and “SELECT”

check the setting

 

appears.

 

2

Press ./> repeatedly

 

 

until “PLAY”, “REC” or

 

 

“(TIMER) OFF” appears,

 

 

then press ENTER.

 

 

Change the setting

Start over from step 1.

 

 

 

Notes

If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority.

Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time).

If the system is on about 15 seconds before the preset time, Play Timer will not be activated.

You cannot use the optional component connected to the MD jacks as sound sources for Play Timer.

You cannot activate Play Timer and Rec Timer at the same time.

18GB