4Connect the mains lead to mains.

If the plug does not fit your wall socket, detach it from the plug (only for models equipped with an adapter).

To turn on the system, press ?/1.

Note

When you turn on the system, the disc is not pulled into the disc slot until “No Disc” appears in the display. Do not attempt to push in the disc until “No Disc” appears, as this may cause malfunction.

To connect optional components

See page 51.

Inserting two size AA (R6) batteries into the remote

E

E

 

e

 

Notes

•If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

•See page 71 for the location of the remote sensor.

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Using the remote control

•Select the item with v/V/b/B and press the center to enter the selection.

In this operation manual, the operation “press the center to enter the selection” is expressed as “press ENTER”.

•Normally operate the remote with the cover closed. Open the cover only when operating the buttons inside the cover.

Press the center to enter the selection (ENTER button).

Opening the front cover

Pull down the upper right corner of the front cover on the unit.

Front cover

10GB