xSIZE

When you move the surround speakers, set the parameters for SURROUND. When you do not connect center and surround speakers, press SPEAKER OUT MODE repeatedly to select “2CH” or “2.1CH” in step 5. The front, center speakers and subwoofer setting is fixed, you cannot change them.

The default settings are underlined.

FRONT

YES

CENTER

YES

 

 

SURROUND

BEHIND (LOW), BEHIND

 

(HIGH), SIDE (LOW), SIDE

 

(HIGH): Specify the position and

 

height to implement the Digital

 

Cinema Surround modes.

SUBWOOFER YES

Notes

•When adjusting speakers, the sound may cut off for a moment.

•Depending on the settings of other speakers, the subwoofer may output excessive sound.

Specifying the surround speaker position and height

When setting the surround speakers, refer to the diagram and select “SURROUND”.

The default setting is underlined.

BEHIND (LOW) Select this if the surround speakers are located in section

Band D.

BEHIND (HIGH) Select this if the surround speakers are located in section

Band C.

SIDE (LOW)

Select this if the surround

 

speakers are located in section

 

A and D.

 

 

SIDE (HIGH)

Select this if the surround

 

speakers are located in section

 

A and C.

 

 

Position diagram

– DVD

Height diagramVarious functions

xDISTANCE

The default distance setting for the speakers in relation to the listening position is shown below.

3m

3m3m

3m3m

continued

35GB