Sony CMT-SE5 Labelling the preset stations, — Manual Tuning, — Station Name, 40GB, 6 Press ENTER, 4 Enter a character, To cancel labelling, 2 Press NAME EDIT/SELECT

Listening to non-preset radio station

— Manual Tuning

1 Press TUNER BAND repeatedly (or move TUNER lever on the unit to FM or AM) to select “FM” or “AM”.

2 Press TUNING MODE repeatedly until both “AUTO” and “PRESET” disappear.

3 Press + or – on the remote repeatedly to tune in the desired station.

Tips

•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

•When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.

•Press TUNING MODE repeatedly until “AUTO” appears in step 2 above, then press + or – on the remote. The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).

•You can switch from another source to the tuner by pressing TUNER BAND (Automatic Source Selection).

Labelling the preset stations

— Station Name

You can label each preset station with up to 10 characters (Station Name).

1 Tune in the station you want to label (see “Listening to the radio” on page 39).

2 Press NAME EDIT/SELECT.

The cursor starts flashing.

Cursor

3 Press NAME EDIT/SELECT to select the desired type of character.

Character type	Select
Alphabet (upper cases)/	Selected AB
blank space/symbols
Alphabet (lower cases)/	Selected ab
blank space/symbols
Numbers	Selected 12

4 Enter a character.

Character type	Do this
Alphabet	Press the corresponding
	letter button (or . or
	>) repeatedly until the
	character to be entered
	flashes, then press M.
Numbers	Press the corresponding
	number buttons.
Blank space	Press 10/0.
´ – / , . ( ) : ! ?	Press 1 repeatedly.
& + < > _ = “ ; # $	Press 1, then press . or
% @ `	> repeatedly.

5 Repeat steps 3 and 4 to enter the rest of the name.

6 Press ENTER.

To cancel labelling

Press MENU/NO.

40GB