6(Asian and Middle Eastern models only) Set the color system to PAL or NTSC depending on the color system of your TV.

The color system is factory set to NTSC for region code 3 models, and PAL for other region code models. Each time you perform the procedure below, the color system changes as follows:

NTSC y PAL

1 Press ?/1 to turn off the system.

2 Press ?/1 on the unit while holding down X on the unit.

The system turns on and the color system is changed.

Note

When you play back a VIDEO CD recorded in a different color system from the one you set to the unit, the picture image may be distorted.

To connect optional components

See page 55.

Inserting two R6 (size AA) batteries into the remote

e

E E e

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

When carrying this system

Perform the following procedure to protect the DVD mechanism.

Use buttons on the unit for the operation.

1Press ?/1 to turn on the system, then press DVD.

2Make sure that no disc is loaded in the system and check that “No Disc” appears.

3Press ?/1 to turn off the system and check that “STANDBY” disappears.

4Unplug the power cord.

10GB