Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. European model is used for illustration purposes only.

TV or projector

 

TV

 

TV

 

 

 

 

 

 

To the component video

To the video input

 

 

To the S video input

input jack of the TV or

jack of a TV

 

 

jack of the TV

projector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To the digital input

To the audio input

 

 

From the audio output

jack of the digital

jack of the connected

 

 

jack of the connected

component

component

 

 

component

 

 

 

 

 

 

 

Amplifier

 

 

VCR or MD deck

 

VCR or satellite tuner, etc.

 

 

 

 

 

 

 

Components Optional
ADVD DIGITAL OUT jack

Use a digital optical cord (square, not supplied) to connect an amplifier with a digital optical input jack. Sound is then output when the system function is set to DVD. By connecting this system to the optical input jack of the optional amplifier equipped with Dolby Digital or DTS decoder, you can enjoy the 5.1 channel sound. If the jack is covered with a cap, remove it before use.

Notes

If you press AUDIO, SOUND FIELD or the buttons related to karaoke mode, or if you connect or disconnect headphones, the sound cuts off for a moment.

Digital audio cannot be output when playing a Super Audio CD.

BVIDEO/SAT IN L/R jacks

Use audio cords (not supplied) to connect an optional analog component (VCR or satellite tuner, etc.) to these jacks. You can then listen to the sound from the component through this system.

CVIDEO/SAT OUT L/R jacks

Use audio cords (not supplied) to connect an optional analog component (VCR or MD deck, etc.) to these jacks. You can then output audio to the component from this system.

Note

If you press AUDIO, SOUND FIELD or the buttons related to karaoke mode, or if you connect or disconnect headphones, the sound cuts off for a moment.

continued

55GB